LORIX OS User's guide Setup Current: Prepare the gateway Prepare the gateway Gateway overviewTurn the gateway onThe power is injected through a PoE injector as shown below: If you invert the switch and gateway side, the gateway will not be powerred and the switch may get damaged. Power must be injected in the power input connector using the switching power supply provided with the LORIX One only:ReferenceHNP12-240L6Output voltage24VDCOutput courant500mA The gateway must never be switched on without a compatible antenna being connected to the Waterproof N connector.When no antenna is connected, the impedance matching to the RF interface is incorrect and may damage the gateway. Once updated, please go on by connecting to the gateway. ×