CLI cheatsheet
This cheat sheet allows you to quickly find some frequently used commands. If you think some commands are missing, let us know!
Output
Use the --output flag to set the CLI output type.
Usage:
CODE
Format | Example |
|---|---|
| pretty | HARDWARE INFORMATION- Product name LORIX One- Product type 863-870- NAND size 512 MB- RAM size 120 MB- Gateway hardware version 1.0d2- Reset controller firmware version 1.1.2 |
| standard | {ProductName:LORIX One ProductType:863-870 NandSize:536870912 RamSize:126013440 GatewayHardwareVersion:1.0d2 ResetControllerFirmwareVersion:1.1.2} |
| json | {"ProductName": "LORIX One","ProductType": "863-870","NandSize": 536870912,"RamSize": 126013440,"GatewayHardwareVersion": "1.0d2","ResetControllerFirmwareVersion": "1.1.2"} |
System
Action | Command | Example result |
|---|---|---|
| Display hardware version Display gateway UID | manager system hardware |
|
Update
Action | Command |
|---|---|
| Check if new updates are available | manager system update check |
| Check the upgrade status | manager system update status |
Networking
Action | Command |
|---|---|
| Set the host name | sudo manager network networking hostname set <hostname> |
LoRa
Action | Command | Parameters |
|---|---|---|
| Set the active forwarder | sudo manager lora forwarder set <FORWARDER> | FORWARDER:
|
| Start / stop the forwarder | sudo manager lora forwarder <FORWARDER> <start|stop> | FORWARDER:
|
You would like to see another command listed here? Ask for an improvement!