Gateway overview

Turn the gateway on

The power is injected through a PoE injector as shown below:

If you invert the switch and gateway side, the gateway will not be powerred and the switch may get damaged.

Power must be injected in the power input connector using the switching power supply provided with the LORIX One only:

ReferenceHNP12-240L6
Output voltage24VDC
Output courant500mA

The gateway must never be switched on without a compatible antenna being connected to the Waterproof N connector.

When no antenna is connected, the impedance matching to the RF interface is incorrect and may damage the gateway.

Once updated, please go on by connecting to the gateway.